|
|
DCEmu Reviews is a site which has reviews and more for every console released and so much more. Part of the DCEmu Homebrew & Gaming Network.
Contact us to do reviews Here
THE LATEST NEWS BELOW
|
November 6th, 2010, 06:56 Posted By: alukadoo
Author : naughtydog from psx-scene.com
Source : http://psx-scene.com/forums/f182/p3go-review-70089/
The P3Go has never exactly been a simple product to review, it's a complicated device . Since the dongle launch back 2 weeks ago, I have always considered it a niche, high-end product and much less a mainstream jailbreak device.
Features:
Yes it really has 128M of flash available for you to play with. Seriously you do not need that much space unless you plan on doing something else no one has dreamed of. Did they build this device with the sole aim of jailbreaking the ps3?
Lets see what is inside the P3Go:
You get two drives shown on your computer after windows has finished installing the necessary drivers for the P3Go. Takes less than a minute to complete. One drive shows you the space left on the P3Go which is 38.4MB when it comes new. You can keep your backup managers. FTP programs etc on the root of this drive and it shows in your "Install Packages" on the ps3 console. The other one shows you the microSD slot on the P3Go. Currently I have none inserted so 0 space shown.
Files already inside the P3Go. You probably have almost all these files installed already. More importantly the P3Go user files are also listed here for ease of access I guess. Very useful. They also have their own backup manager in here. Neat and tidy but nothing to be excited about. Simple operational tools like Exit/Copy/Delete/Launch although the interface is nicer compared to some existing ones. You are better of sticking to your usual Gaia, Open or Rogero Manager.
Now opening PS3_Game folder up you meet this picture above. Basically contains their manager as well as game covers.
Ok lets move on to more important things ie how it works.
This device comes preflashed with an update dated 2010.10.22 but there is one available on their official website dated 2010.10.26. This contains both Hermes V4B and PL3 payloads. Interesting stuff is you can boot in either Hermes or PL3 depending on your choice.
P3Go Firmware Update
Yes that simple and it works.
To boot in Hermes:
Boot normally as any jailbreak device by pressing power and immediately pressing eject and Hermes is instantly used in jailbreak.
To boot in PL3
Have a microSD card available in the slot of the P3Go before booting it the normal way. That is power and pressing eject. Having the microSD is vital if you want to use PL3 else it automatically uses the Hermes.
Downside of this is if you do not have a microSD you can never boot in PL3 and I think that is a minus. A switch would have done the trick.
No game testing results this time as it's pretty obvious there is nothing new here just a new clone to jailbreak the ps3. Works as your normal jailbreak device with extra features.
The Good
Surprisingly well-built
Powerful technology
Amazing price point
Stylish design
THE BAD
Seriously too much flash space
Users cannot flash with any hex or bin they desire
Official Website: GAMEBOX
Any further information can be asked in this thread or you can check from thier official site. By the way I got mine from LIGHTAKE. Very cheap 25.89USD and shipped fast.
Packaging:
THE LEDS: Cant get a better picture when connected to the ps3 so here is PC
To read more of the post and Download, click here!
 Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
 |
|
|
|
November 5th, 2010, 02:15 Posted By: bandit
PS3Break PS3 Break v1.1 USB Dongle
Manufacturer: PS3Break
Site: Buy from DealExtreme (v1.2) / Buy from VolumeRates (v1.1) / Buy from VolumeRates (v1.2) / Buy from LighTake (v1.1) / Buy from LighTake (v1.2) / Buy from PriceAngels (v1.1) / Buy from PriceAngels (v1.2) / Buy from AceKard.ca
Price: $18.00-$32.99
PS3Break ON/OFF Switch (not included with PS3Break but posted for those who own PS3 Slim and is interested)
Site: Buy from DealExtreme / Buy from LighTake / Buy from VolumeRates / Buy from PriceAngels
Price: $3.99-$6.00
Overview : The PS3break Team presents a new design PS3break with Mini pocket-size package, which is out of the original model, the introduction of modern design, so that the items are more attractive and competitive. Let’s review more exciting news here.
Features :- 100% Upgradeable hardware firmware with V1.1 thoroughly!
- The key “Upgrade” for software upgrading and avoids to be blocked by SONY. Users can also upgrade the updated software through computer.
- Reading speed will be 2 times faster and it makes users to play more smoothly.
- Games can be copied and saved to internal or external hard disk, in this way, the expensive blue-ray driver and disc can be abandoned.
- Plug & play USB port, the installation will be finished in a few seconds.
- Homebrew software is supported.
- Simple and clear illustrations will guide you to install step by step.
- PS3 Break is compatible with all fat and slim model.
- Support Upgrade function by press the upgrade key (With Firmware V1.1) of the item.
- No need Original BD booting-disc any more, Users can play the PS3 games directly.
- Programmable USB freely.
Quality/Usability : There has been nothing but floods of jailbreak clones in the PlayStation 3 scene. But who's to complain? More options to choose from and more reasonably priced devices.
PS3Break released their original v1.0 and left early adopters hanging as their bootloader did not allow users to update their PS3Break. This left a sour taste in buyers mouth. But like any business/manufacturer, they released a new product and in comes v1.1. PS3Break v1.1 comes in a plastic case with TRUTH INQUIRY (more info about this below) and a light blue strap. The PS3Break itself is in an aluminum casing and has a UPGRADE button on side of the case. The UPGRADE button is for when you want to update the PS3Break with the latest files, it puts the PS3Break into update mode.
PS3Break is one of the clones that is being cloned with fakes. To combat this and protecting PS3Break users, PS3Break has included a "TRUTH INQUIRY" sticker on their cases. The concept is becoming a tend for identifying fakes. To confirm that its authentic, you would need to scratch up the sticker like a scratch off lottery ticket and then enter the 20-digit code on their website, then click CHECK.
Instructions on How to Load PS3Break files :
Required files:- PS3Break Burner Tool v1.1
- dotNetFx40_Full_x86_x64.exe (included with Burner Tool)
- vcredist_x86.exe (included with Burner Tool)
- PS3break Burner file
Rather than giving you more things to read about and directions on how to setup and update the PS3Break v1.1, we've made a video as well as how to operate it.
Since making the video, PS3Break now directs you to a different site to download the necessary files. It now tells you to go to GOGSoftware.
I had no problems installing FTP program, SNES homebrew application, homebrew games and Open Manager. In order for me to fully test, I had to remove what I had already installed. PS3Break has released their own version of Open Manager but its really nothing different than the one released by moh.sakhaii. All they did was change logos and replaced it with their own. I personally would just stick with the original as you'll have a quicker and better support.
Conclusion : Overall, the PS3Break PS3 Break v1.1 USB Dongle worked like any other jailbreak device on the market. However, with Sony going on a suing spree and doing everything they can to stop these type of devices, PS3Break is one of them. The reason is because it uses the words "PS3". Not to mention, it makes it easier for customs to stop and cease PS3Breaks with Sony winning court rulings. In order to put the PS3Break into update mode, you needed to use a sharp object whether it be a pen, pencil or paperclip to press on the UPDATE button. This got annoying trying to scrounge for something. I guess PS3Break kind of noticed this too and released v1.2 and the UPDATE button is now easily accessible. Yes, if you bought v1.0 or v1.1, you'll have to go out and buy a new PS3Break v1.2. I don't know of any other manufacturer that has released this many revisions. Its great that they are improving the aesthetic look and external functions but these are things that should of been present from the beginning.
PS3Break has also released their on ON/OFF switch for PS3 Slim owners. Unfortunately, I do not have one to review but thought I would provide a link to online sellers for those who are interested in getting one for their PS3 Slim.
Please note that none of the "upgrade" products listed in this site are endorsed by Nintendo, Sony and/or Microsoft. DCEmu Reviews and DCEmu Network does not condone piracy. The primary functions of a "modchip" and/or "flashcart" are to allow you to play imported games and homebrew software that you legally own or simply just for experimenting with hardware. We in no way endorse piracy, and encourage all users to do the right thing and support the developers/manufacturers that support them. We do not take any responsibilities for any use outside of these parameters or where the use of such a device is illegal.
Images via comments
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
November 4th, 2010, 16:13 Posted By: bandit
A reader sent Kotaku this promo sleeve for the PlayStation 3 Bluetooth headset earlier this week, which now appears to be sporting a slimmer, sleeker design than the original model.
Not only has the ear clasp been made thinner, but the front buttons and indicators have been cleaned up too. The material also clearly states that this is an official Sony product, not a third-party offering.
The feature set on the back of the box has no new features compared to the existing version, so it appears to be a simple aesthetic upgrade for a device that was looking a little, well, clunky as we push on towards 2011.
As the box says, it'll be priced at $50, which is the same as the existing model. No word on a release date.
Below is a comparison between the new headset, on the left, and the old, on the right.
Source: Kotaku
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
November 4th, 2010, 00:15 Posted By: bandit
We haven't heard anything new recently from XCM, but they've informed us with exclusive information and a picture (sorry, been slow at posting news) that they will be releasing a plug and play fan for the Xbox 360 Slim. The XCM "Wing" fan is a plug and play solution (no need to modify the console) and can lower the consoles temperature by 5-6° Celsius (or 42.8° Fahrenheit). XCM Wing Fan also has a built-in auto mode to monitor the consoles temperature which can increase/decrease the fan's speed accordingly.
No word on pricing or release date.
Description on box of XCM 'Wing' Fan...from yours truly  :Hate the dreaded RROD (Red Ring of Death) and overheating problems on the fat Xbox 360 and got the Xbox 360 Slim? Why not prevent the headaches and get the XCM Wing Fan? The XCM Wing Fan is a plug and play solution (no need to modify the console) and can lower the consoles temperature by 5-6° Celsius (or 42.8° Fahrenheit). XCM Wing Fan also has a built-in auto mode to monitor the consoles temperature which can increase/decrease the fan's speed accordingly.
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
November 1st, 2010, 14:54 Posted By: bandit
THE WINNERS ARE...
http://twitter.com/ShadyPharmer @ShadyPharmer
http://twitter.com/shango46 @shango46
http://twitter.com/realyst2k @realyst2k
http://twitter.com/revanex @revanex
http://twitter.com/abadmotivator @abadmotivator
Winners will be contacted via Twitter for mailing address.
---------------------------------------------------
After our last HUGE successful contest back in September, we're back with another for the month of November! This time we have FIVE (5) XCM Universal USB Multi-Charger for all of you to grab your little hands on. The entry is simple, open to anyone and everyone worldwide. Rules and entry follow below.
Sponsor:
We would like to thank XCM for sponsoring this giveaway and we highly recommend all of you to pick up all you console modding accessories whether it be replacement cases, controller adapters or just useful things in general. I've been using the Multi-Charger to charge my iPod Touch, Blackberry, PlayStation 3 Dual Shock controllers, Xbox 360 controllers...pretty much anything that requires USB to be charged.
Be sure to subscribe and follow us on YouTube, Facebook and Twitter for more news and future contests!
How to enter:
This time around, we're going to do it a little different and use Twitter and tweeting only DCEmu Reviews and DCEmu Reviews Games news. All you have to do is retweet the post about the giveaway (http://twitter.com/dcemureviews/status/29374917101), become a follower on Twitter and you will be automatically entered. If you already are a follower on Twitter, no worries! Just retweet about the giveaway. Only 1 entry per person. The contest ends November 30, 2010 and winners will be chosen randomly and first post will be updated with winners. Winners will be contacted through Twitter for mailing address.
*DCEmu Reviews and DCEmu is not responsible for lost or damaged packages and/or electronic devices. All shipping of prizes are handled by XCM. Any concerns in regards to XCM Universal USB Multi-Charger or shipping, please contact XCM at xcmcc@xcm.cc.
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
November 1st, 2010, 14:54 Posted By: bandit
After our last HUGE successful contest back in September, we're back with another for the month of November! This time we have FIVE (5) XCM Universal USB Multi-Charger for all of you to grab your little hands on. The entry is simple, open to anyone and everyone worldwide. Rules and entry follow below.
Sponsor:
We would like to thank XCM for sponsoring this giveaway and we highly recommend all of you to pick up all you console modding accessories whether it be replacement cases, controller adapters or just useful things in general. I've been using the Multi-Charger to charge my iPod Touch, Blackberry, PlayStation 3 Dual Shock controllers, Xbox 360 controllers...pretty much anything that requires USB to be charged.
Be sure to subscribe and follow us on YouTube, Facebook and Twitter for more news and future contests!
How to enter:
This time around, we're going to do it a little different and use Twitter and tweeting only DCEmu Reviews and DCEmu Reviews Games news. All you have to do is retweet the post about the giveaway (http://twitter.com/dcemureviews/status/29374917101) and become a follower on the Twitter. Also reply back to http://reviews.dcemu.co.uk/retweet-n...rs-341122.html with link to your Twitter account, once you have retweeted and you will be automatically entered. If you already are a follower on Twitter, no worries! Just retweet about the giveaway and post back to http://reviews.dcemu.co.uk/retweet-n...rs-341122.html. Only 1 entry per person. The contest ends November 30, 2010 and winners will be chosen randomly and first post will be updated with winners.
*DCEmu Reviews and DCEmu is not responsible for lost or damaged packages and/or electronic devices. All shipping of prizes are handled by XCM. Any concerns in regards to XCM Universal USB Multi-Charger or shipping, please contact XCM at xcmcc@xcm.cc.
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
October 29th, 2010, 22:28 Posted By: bandit
Brandon Wilson, known for releasing the jailbreak for TI-84 has just tweeted that its possible on the Texas Instrument TI-89 TITANIUM (89TI) Graphing Calculator!
Here's what he tweeted:
I have to admit, I didn't think it was going to happen but...folks, the jailbreak works on the 89Ti. Proof, source, and release coming soon.
Source: Brandon Wilson (Twitter) / PS3JB
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
October 28th, 2010, 02:38 Posted By: bandit
Prankster AVR PS3 USB Dongle ecliPS3
Manufacturer: Prankster AVR
Site: Buy from OzModChips / Buy from ModchipCentral
Price: $39.95-$44.99
Overview : Prankster AVR is a small USB stick device which can be easily programmed with custom code to prank your friends. It uses the ATmega family for its internal IC. This means it can be programmed very easily with a simple click of an exe file from your PC.
The code that will ship with the device emulates a CAPs lock key being switched on and off every couple of seconds:
tHE DEviCE JuST LookS LiKE a noRMAL uSb StiCK, So IT MIght TAke SoMEone a WHile to FIguRE ouT whAT is GoING on.
Features :- Caps Locker - Will toggle the caps lock key on the keyboard
- Numlocker - Will toggle the NumLock key on the keyboard
- Help me! - Will press F1, which will bring up the help screen on your PC
- Who is BOB? - Will write "BOB" on the screen if you are in a text editor (word etc). Who is bob?!
- FBI - Same as above, but with the words FBI
- ET phone home! - Will press the Home key and move the cursor to start of the line
- Schizophrenia - Will Page up or down!
Quality/Usability : This thumbdrive looks like an ordinary thumbdrive but its not. This device is meant to prank your friends and/or family. When the dongle is inserted, it plays all kinds of tricks such as toggling CAPS lock, NUM lock, cause the screen to move up and down and many other new tricks. First, you'll need to download the Prankster application. This allows you to choose the prank of your choice. To load the prank, insert the Prankster AVR into a USB on your computer and open up the .exe file you just downloaded and extracted.
Once the program is open, you're given a few selections to choose from.
Once you've chosen which prank you want, it will give you a new window with the intervals of how often you want the prank to be played.
*Note: Your CAPS lock and NUM lock will toggle. So you will need to make sure that CAPS lock is not ON and NUM lock is not off.
From there, there isnt much left. Pretty much just give it to your target, sit back and laugh. Pretty lame huh? Considering it says "Prankster AVR" on the stick itself and its not a storage device. But if you own a PlayStation 3, you're in for a treat! The Prankster AVR's bootloader was actually "hacked" by a 3rd party (code by Charlie Brown; main reversing by syph0r) to be able to run HEX files and to match the bootloader of the ecliPS3 (another Jailbreak USB clone device). However, once you convert this into jailbreak device, you're unable to go back to a pranking device as the original bootloader has been overwritten with that of the ecliPS3. But now that crappy bootloader is now overwritten with ecliPS3's, basically any PSGroove or PSFreedom based hex file for any board type can now be imported (both AVR and PIC based boards are supported). However, should this review be now turned into a ecliPS3 review?
Requirements :- PS3 Console (fat or slim)
- Console (firmware) version 3.41 only
- Remove all discs from the drive
- Do not connect any devices to the console via USB
- IMPORTANT: The console must be completely switched off before using Prankster AVR. For fat versions, use the switch at the rear. For slim versions, simply remove the power cable. This is extremely important for the process to work correctly when you start the console.
ecliPS3 Features :- Fully updatable via USB on your PC using an encrypted bootloader
- USB Plug and Play solution that installs in seconds without any need to open up the PS3.
- Supports any available type of firmware for the PS3. PSGroove, PSFreedom and so on.
- Can load directly PSGroove .hex files and Payloads .BIN files
- Can be removed once started. No need to have the USB key always into your PS3!
- Does not break your warranty seal.
- Compatible with all PS3 models, both Fat and Slim.
- Supports all regions: USA, JAP, PAL and KOREA.
- Optimized and enhanced code (most competing products simply use available code)
- Disables forced software updates and will never brick your console.
- Supports most games and homebrew applications.
- Easy-to-use software for backing up, managing, and playing games from external USB Hard Drive.
- Playing games from HDD is much more enjoyable, benefiting from greatly enhanced seek and loading times.
- Supports installing homebrew application on PS3 and external USB media.
- Simple and clear illustrations will guide you to install step by step.
- ecliPS3 is supplied blank. Users can download the latest “Firmware Manager” from our website and choose what firmware they prefer to install from the many available!
Instructions on How to Load ecliPS3 firmware, HEX (.hex) Files, Import Payloads (.bin) or ERASE files :
Required files:
You must "hack" the Prankster AVR by using PrHackster.exe. If you used the Prankster.exe to try out the prank, its best if you remove the dongle and reinsert it back into the USB. Double click on the PrHackster.exe and it will toggle the Scroll and NUM lock. This overwrites the Prankster bootloader and replaces it with ecliPS3's bootloader. If successful, it will display a message saying that activation is done which will now be recognizable with Eclipse's Firmware Manager and to launch ecliPS3 Upgrader (Firmware Manager). Before you launch the firmware manager, you MUST download Microsoft's Visual C++. Without this, Eclipse's Firmware Manager will not work and will give an error when you try and open it.
Eclipse's Firmware Manager looks similar to that of PS Samurai's.
On the Upgrader software, you're able to load their own proprietary file (ecliPS3 FIRMWARE), PSGroove HEX (.hex) files, Import payload (.bin) files or ERASE the files on the Prankster AVR. So, if you want the latest updates, you can simply load the HEX files and than load ecliPS3 files when it becomes available if you wanted to. To load the files, select the method you want to load your files whether it be ecliPS3's firmware, HEX files or importing payloads and select the file you want to load. Once selected, click on START and the software will begin to upgrade the dongle with the file you selected. Once completed, it will pop up with a message and click OK. Now, you're able to remove the dongle from the computer and into the PS3.
What makes the ecliPS3 bootloader different from some of those on the market is that no matter what HEX file you use, it will work (at least for the ones I've tested). So there is no need to be afraid if you load the wrong HEX and that it will damage the dongle or corrupt the bootloader.
Tested HEX files : (HEX collections)- Arduino
- AT90USBKEY
- ATAVRXPLAIN
- AVROPENDOUS
- Benito
- Blackcat USB
- iLLNESS P3Free
- Maximus AVR USB
- Minimus AVR USB
- Olimex
- Open Kubus
- PS3Key Open Version (for AVRKey)
- Teensy 1.0
- Teensy 2.0
- Teensy++ 1.0
- Teensy++ 2.0
I've tested pretty much every HEX file available with both Hermes v4b and Karatoko's PL3. All HEX's were ranged from 8MHz to 16MHz and all worked with no problems and even the LEDs worked as well. I was unable to remove the USB from the case as its glued but was informed that it contains a 16kb chip.
Operation :
Once the power to your console is completely disconnected:- Turn on the console (PS3 Fat with the switch, PS3 Slim connecting the power cable)
- Insert Prankster AVR into a USB port on the PS3
- Start up the PS3 and press the EJECT button.
- The LED (which should have been red initially) will change to green.
- If the above process worked, there will be a link to “Install Package File” in the game menu.
In order to make sure the Prankster AVR dongle worked flawlessly, I had to uninstall all my homebrew applications that I had originally installed. To install applications or any homebrew applications, you will need to download and save the .pkg files to a USB drive such as thumbdrive or harddrive. To install, simply insert USB drive to the PS3 and navigate to "INSTALL PACKAGE FILES" on the XMB under GAME. Select the file you want to install by pressing X and it will automatically install the file. All applications installed and loaded without any problems.
Conclusion : Overall, I dont know what to call this product or even consider this review as. Prankster AVR, where its an actual pranking device? Prankster AVR, where its just another jailbreaking device? Or ecliPS3, since once the Prankster AVR is hacked, that's the bootloader that is installed. I'm so confused! None-the-less, Prankster AVR is another jailbreaking device (if you intend it to be) but is able to load any...and I mean ANY HEX files you install without the fear of it corrupting or bricking. Since it accepts all HEX files from any board, you won't have to wait for a specific HEX file to be compiled when a new update is released. Whichever comes out first, you're able to use it. If you're the type that likes to experiment and try new things, you can even use this to see if the compiled HEX works before loading it on the actual device. Since the product is a pranking device and the idea is to prank someone, it's best if the words/logo "Prankster AVR" wasn't printed on the casing. Kind of defeats the purpose.
Please note that none of the "upgrade" products listed in this site are endorsed by Nintendo, Sony and/or Microsoft. DCEmu Reviews and DCEmu Network does not condone piracy. The primary functions of a "modchip" and/or "flashcart" are to allow you to play imported games and homebrew software that you legally own or simply just for experimenting with hardware. We in no way endorse piracy, and encourage all users to do the right thing and support the developers/manufacturers that support them. We do not take any responsibilities for any use outside of these parameters or where the use of such a device is illegal.
Images via comments
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
October 26th, 2010, 17:59 Posted By: bandit
P3Free Pic-Fun USB Jailbreak Dongle
Manufacturer: P3Free (by Wii-Clip)
Site: Buy from DealExtreme / Buy from VolumeRates / Buy from LighTake / Buy from PriceAngels / Buy from IC2005 / Buy Serial Programmer from IC2005 / Buy Pic-Fun + Serial Programmer from IC2005
Price: $16.50-$29.90 / $29.00 (Serial Programmer) / $39.90 (Pic-Fun + Serial Programmer)
Overview : PS Jailbreak/PSGroove clone that takes advantage of PS3 firmware 3.41 exploit and allows you to install homebrew applications. THIS DOES NOT WORK ON FIRMWARE 3.42 OR ABOVE UNTIL A NEW EXPLOIT/METHOD IS FOUND!
Features :- Use PIC18F2455/2550/4455/4550 MCU chip
- Come with HID BTL, can upgrade via USB port directly
- Come with the 8pin FPC port, can program any firmware to PIC chip via our FPC programmer
- It can program by any programmer that build in standard ICSP port after use the ICSP swap board
- Come with one RESET/BTL combo button, can use for reset the PIC or enter BTL mode for upgrade
- Come with one switch for set the RC6(TX) to GND, for enter the BTL mode with some firmware
- Come with 2 LEDs to display the working status
- Come with the last "F0" LED demo legit firmware
Quality/Usability : This review is a version and comparison of P3Free PIC Serial Programmer USB. Both are the same with a few slight differences.
 
[Left: P3Free and Right: Pic-Fun]
As you can see, the noticeable difference between P3Free and its predecessor, Pic-Fun, is LED, buttons and sticker placement. They both have FPC port but is not really needed for Pic-Fun unless you brick it. On the P3Free, the LEDs are visible and on the Pic-Fun, the LEDs are located inside the casing. The switch locations are also different. On the P3Free, the RESET button is in the middle where as the Pic-Fun, the RESET button is on the right side. The newest addition to the Pic-Fun is a switch [RC6/TX to GND] and a yellow unique serial code label. RC6/TX allows you to go into bootloader mode with some firmwares.
Before you start, you'll need these files :Once you have downloaded all the necessary files, you can begin to load the latest HEX files onto the Pic-Fun. Make sure that the switch is on the far left. Loading files via USB is known as "softflashing".
- Insert Pic-Fun into USB port of your computer
- Now just press the RED RESET/BTL button once
- HID_Bootloader should detect your kit
- Click the "Open Hex File", select the right HEX and open it
- Now click the "Program/Verify" button, when you see "Verify Started", then mean it's upgrade complete
Now, if you ever brick your Pic-Fun by loading the wrong hex or something, you can load it back using a FPC Serial PIC Programmer. This is known as "hardflashing". The FPC Serial PIC Programmer is not included with Pic-Fun and can be purchased separately ($29.00). This is not really necessary unless your Pic-Fun is no longer operational and bricked.
If you ever need use the Serial Programmer, the instructions are as follows:
Click here to download the PICPgm v1420 PC program
How to burn the firmware to the PIC chip :
[1] Insert the Serial programmer to Serial Port of your PC and click the "Search" button, to see if it can find programmer or not.
If can't auto detect, then means your serial port has a problem. Please check it or change to another PC and try again, until to it can auto detect JDM hardware.
[2] Now link to your P3Free kit and click the "Search" button again, it should can auto detect the PIC chip.
If not, maybe you insert the FPC cable in a wrong side.
[3] When everything is ready, click the "Browse" button to select Bootloader_USBHIDC18_P3Free_V1.0_12MHz_BTL-pin1_MCLRon_LVPoff_F0_Version.hex.
[4] Then click the "Program" button
[5] It will start to burn and the progress bar will stop to respond, it may seem like it froze but its still programming.
[6] After program complete, this green window will show 3 seconds and auto close, now the new firmware is ready for test, all done!
The process is the same as the PSGroove and requires 3.41 firmware. Anything above this will NOT work as Sony has blocked off this method. Anything under 3.41 will cause some problems.
The P3Free boot step :- Remove the AC power cable from your SLIM PS3, or turn off the AC switch with your FAT PS3;
- Insert the Pic-Fun, and remove other USB device if you inset it before, and eject the disk from BD drive if exist;
- Insert the AC power cable to your SLIM PS3, or turn on the AC switch with your FAT PS3;
- Touch the PS3 power button to active PS3, then touch the EJECT button quickly;
- You will hear some "beep beep" sound from PS3, then the Pic-Fun's RED LED will start to blink, after a while, the RED LED will turn off and the GREEN LED will turn on. When you see the GREEN LED turn on, it means the Pic-Fun is successfully active, now you can take out the Pic-Fun if you want.
The video shows how to insert the P3Free but the same applies to the Pic-Fun:
In order to make sure the Pic-Fun dongle worked flawlessly, I had to uninstall all my homebrew applications that I had originally installed. To install applications or any homebrew applications, you will need to download and save the .pkg files to a USB drive such as thumbdrive or harddrive. To install, simply insert USB drive to the PS3 and navigate to "INSTALL PACKAGE FILES" on the XMB under GAME. Select the file you want to install by pressing X and it will automatically install the file. All applications installed and loaded without any problems.
Conclusion : Overall, the P3Free Pic-Fun USB Jailbreak Dongle is essentially what the P3Free should have been when it first released. Its USB updatable out of the package. Pic-Fun comes with FPC cable to use with Serial PIC Programmer. But the cable is not even needed if it doesnt even come with the programmer. Even if you were to purchase the programmer, it comes with the cable. The ability to reload the bootloader if it gets erased or corrupted is a big PLUS. Other clones or jailbreak devices does not allow you to do so. The only site that sells the serial programmer that I know at the moment is IC2005. They charge $29 for the programmer. Pic-Fun itself costs $25 at LighTake and $29.90 at IC2005. If you're interested in Pic-Fun and the Serial Programmer, you're better off purchasing the bundle from IC2005 ($39.90). So essentially, you're paying only $10 for the Serial Programmer from IC2005.
Please note that none of the "upgrade" products listed in this site are endorsed by Nintendo, Sony and/or Microsoft. DCEmu Reviews and DCEmu Network does not condone piracy. The primary functions of a "modchip" and/or "flashcart" are to allow you to play imported games and homebrew software that you legally own or simply just for experimenting with hardware. We in no way endorse piracy, and encourage all users to do the right thing and support the developers/manufacturers that support them. We do not take any responsibilities for any use outside of these parameters or where the use of such a device is illegal.
Images via comments
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
October 25th, 2010, 19:22 Posted By: bandit
  
Over at PS3Hax, member Robo Hobo has been busy lately with releasing some nice emulators for the PS3. The latest is Mednafen which supports NES, GB, GameBoy Color, GameBoy Advance, Sega Master System and Game Gear. Future versions should have PC Engine and PC Engine CD, as well as Atari Lynx, Neo-Geo Pocket and WonderSwan.
Taking a break from Gambatte and Nestopia, I decided to port Mednafen too. While I still recommend the former two for Gameboy and NES, the current version of Mednafen includes Sega Master System, Sega Game Gear, and Gameboy Advance emulators. None of those are currently available for the PS3. Future versions should have PC Engine and PC Engine CD, as well as Atari Lynx, Neo-Geo Pocket and WonderSwan.
The emulator supports NES, GB, GBC, GBA, SMS, and GG. Loading from Zip, save states and fast forward. Reconfigurable controls. And a terrible user interface, one of the best terrible user interfaces if I do say so myself.
Get it at its google code page.
Source: PS3Hax
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
« prev
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
next »
|
|
|
